Haircut numbers explained: what a number 1, 2 and 3 really look like
Raees KiplingMaster Barber
Published

A number 2 haircut is a clipper cut with a 6mm guard, short enough to look tidy but long enough that you cannot see much scalp. Every clipper number stands for a guard length, and the higher the number, the more hair you keep. Learn a handful of those numbers and you can tell your barber exactly how short you want to go. Here is what each grade looks like, from a zero right up to an 8.
How clipper numbers work
Clippers have a blade that cuts very close to the skin. To leave hair longer, the barber clips a plastic guard over the blade. Each guard has a number, and that number is the length of hair it leaves behind.
The sizes below are the common UK standard. Brands vary by a millimetre or so, but the steps between them stay the same.
- Grade 0: no guard at all, roughly 1mm. Close, with plenty of scalp on show.
- Grade ½: about 1.5mm. A shade softer than a zero.
- Grade 1: 3mm. Short, with the scalp visible underneath.
- Grade 2: 6mm. Short and even, with good coverage on thicker hair.
- Grade 3: 10mm. Soft and fuller, still clearly a clipper cut.
- Grade 4: 13mm. Long enough to lie flat and show a little texture.
- Grades 5 to 8: 16mm to 25mm. Used mainly on the top of the head, or for blending into scissor work.
"Number", "grade" and "guard" all mean the same thing: the length the clipper leaves.
What a number 1, 2 and 3 really look like
Number 1
A grade 1 is short. On dark, thick hair it reads as a close, even shadow. On fair or fine hair you will see more scalp, so it can look shorter than you expect. It suits warm weather and anyone who wants minimal fuss.
Number 2
The number 2 haircut is the classic middle ground. It covers the scalp on thicker hair, looks neat straight away and grows out without looking scruffy for a while. If you are unsure where to start, a 2 all over is a safe first try.
Number 3
A grade 3 leaves enough length to soften the shape of the head. It suits men who want a clipper cut that still looks like a full head of hair, and it is kind to bumps or uneven patches.
Grades on top versus the back and sides
You do not have to use one grade everywhere. A classic mix keeps a longer grade on top, such as a 3 or 4, and a shorter one on the back and sides, such as a 1 or 2. That is the idea behind a 2 level buzz cut: one grade on top and a shorter one around the sides.
If you want the sides to blend smoothly into the top instead of stepping down, that is a fade. Our guide to the different types of fades explains how the blend works and what to ask for.
For a cut that keeps more length on top and uses scissors as well as clippers, a short back and sides is the traditional option.
One grade all over
If you want one length everywhere, ask for a buzz cut with a single clipper grade. At Bladerunners we run the same guard over the whole head, then tidy the neckline and around the ears so it looks sharp rather than home done. Tell your barber the number you want and whether you would like the neckline squared or rounded. Current prices for buzz cuts and 2 level cuts are on our price list.
Which number should you ask for?
- First clipper cut: start at a 3 or 4, then work down over a few visits once you know how short suits you.
- Low upkeep and cool in summer: a 1 or a 2.
- Fine or fair hair: go one grade longer than you think, as more scalp shows through.
- Thicker, darker hair: a 2 all over looks full and even.
Say the grade clearly, for example "a 2 all over" or "a 3 on top and a 1 on the sides". If you are between two numbers, your barber can start at the longer one and check with you before going down.
Questions people ask about haircut numbers
Is a number 2 haircut short?
Yes, but not severe. At 6mm it hides the scalp on thick hair and looks tidy and even. On fine or light coloured hair it will look closer to the skin, so some men prefer a 3 for a softer finish.
What does a zero or a half mean?
A zero is the clipper with no guard fitted, cutting to roughly 1mm. A half sits between a zero and a 1, at about 1.5mm. Both are very close to the skin, so they suit men who want the shortest finish without shaving the head.
Are clipper numbers the same at every barbers?
Close enough. UK guards follow the same pattern, so a grade 2 in one shop will look much like a grade 2 in another. Small differences come from the clipper brand and from how the barber finishes the edges, which is why saying the number out loud still matters.
Will a short grade show a scar or a bump?
It can. A grade 1 or below shows the shape of the scalp clearly, including small scars, dents and bumps. If that bothers you, go up to a 2 or 3, which hides far more. Mention anything you would like covered before your barber starts so they can pick the grade with you.
Book your next clipper cut
If you already know your number, or fancy a second opinion in the chair, call the shop on 07923 042050 or visit us at Crystal Peaks Market, Sheffield. We are open Monday to Saturday, 9am to 5pm, and you can read more about our buzz cut before you call.



