Taper vs fade: what is the difference and which should you ask for?

Raees KiplingMaster Barber

Published

Back of a man's head showing a short cut tapered at the neckline, with a taper vs fade comparison

The difference in taper vs fade comes down to how much hair comes off the sides. A taper only shortens the edges at the sideburns and neckline, while a fade takes the whole back and sides down short and blends them up into the top. Both look sharp. The right one depends on how bold you want the finish, how often you will come back, and what you need the cut to do at work or school.

Taper vs fade side by side

  • Where the clippers go: a taper works on the outline only. A fade covers the full back and sides.
  • How short it gets: a taper usually stops at a short grade. A fade can go right down to bare skin.
  • What people notice: a taper looks like a neat, well kept haircut. A fade looks like a deliberate style, with a clear change from short to long.
  • How it grows out: a taper softens slowly and still looks tidy weeks later. A fade loses its crisp blend sooner.
  • Upkeep: a taper can stretch between visits. A fade, especially a skin fade, looks its best with regular trips back to the chair.

If you want the full rundown of fade heights and shapes, our guide to every type of fade covers low, mid and high, plus bursts and drops. This post sticks to the head to head.

Where the confusion comes from

Both cuts get shorter towards the bottom, and barbers use "taper" for that gradual shortening, so you may hear a fade called "tapered". In the chair, a taper means the subtle version and a fade means the full one. The fix is simple: describe how much of the sides you want short, not just the name.

Taper fade vs low fade

These two are the closest pair, and the line between them is fine.

Taper fade

A taper fade keeps the blend tight to the hairline, around the ears and down the nape. Above that small band, the sides keep their normal length. From a distance you see a clean outline rather than a fade.

Low fade

A low fade starts in the same place but carries the short blend a little further up and around the head, usually to just above the ears. More of the sides sit short, so the contrast is more obvious.

Think of the taper fade as tidy edges and the low fade as the first proper step into a fade.

Low fade vs mid fade

Once you have decided on a fade, the next choice is height. A low fade keeps the short section near the ears and is the easier one to wear at work. A mid fade lifts the blend to around the temples, so more skin or short grade shows and the top stands out more. If you are moving up from a low fade for the first time, a mid fade is a sensible next step rather than jumping straight to high.

Which should you ask for?

Choose a taper if you:

  • want a natural, grown up finish that suits the office
  • are keeping length or a side parting on the sides
  • want to stretch the time between haircuts

Choose a fade if you:

  • like a sharp, high contrast look
  • are wearing a short top, such as a crop
  • are happy to come back regularly to keep the blend clean

If you are still torn, pick the taper first. If it feels too safe once you have lived with it, you can go shorter next time.

Getting the cut you want

At Bladerunners, the quickest way to get the right result is to show your barber with your hand where you want the short hair to stop. If the answer is a clean, natural finish with length kept on the sides, start with a men's haircut tailored to your hair type and talk the back and sides through before the clippers come out. If you want the full blend down to the skin, our skin fade is cut low, mid or high to suit you.

Our haircut numbers guide shows what each clipper grade looks like, and current prices for every cut are on the price list.

Questions people ask about tapers and fades

Is a taper fade a taper or a fade?

It is a fade kept very low. The clippers blend the hair short only around the ears and neckline, so it sits between a classic taper and a low fade. Ask for it by name, then point to where you want the blend to stop.

Which works better with curly hair?

Both work, but they give different results. A taper keeps curls on the sides and only cleans up the edges, which suits a fuller shape. A fade removes the sides so the curls on top stand out more. Your barber can look at your curl pattern and suggest which suits it.

Can I switch from a fade to a taper?

Yes, but you need some patience. The sides have to grow back before a taper will look right, which can take a few weeks after a short fade. Keep the neckline tidy in the meantime and your barber can shape the taper once there is enough length.

Which is better for a smart office look?

A taper. It keeps the sides fuller, grows out softly and looks polished with a shirt and tie. A low fade with a grade at the bottom is the next choice if you want a little more edge without looking too bold for work.

Pick your finish at Crystal Peaks

Whether you have settled the taper vs fade question or want a barber to help you decide in the chair, call the shop on 07923 042050 or visit us at Crystal Peaks Market, Sheffield. We are open Monday to Saturday, 9am to 5pm, and you can read more about our men's haircut before you call.